620 BW Film - JCH Street Pan 400 (1 Roll)
Japan Camera Hunter Street Pan film. Contrasty and full of character, this is a fantastically versatile panchromatic film perfect for the lovers of monochrome.
400 High Speed iso** / 1-roll / Hand-Rolled 620
** Note that 100 iso or 200 iso film is recommended for most 620 cameras. This high speed color film is recommended for 620 cameras that have manual shutter and f-stop speeds. Consult your camera manual. Using a hand-held light meter is recommended.
How many images do I get per roll?
Each roll will deliver 8, 12 or 16 shots depending on your camera. Check your camera manual. No manual? Download one from our good friend Mike Butkus here.
This special high speed film was originally designed for traffic surveillance cameras, making this film ideal in all weather conditions. The film sensitivity can vary with processing. JCH StreetPan 400 can be exposed as a 200 to 500 ASA/ISO film.
Due to its sensitivity to red light, JCH StreetPan 400 is the optimum film for dawn, dusk and winter photography. It’s speed and sensitometric characteristics make the film extremely suitable for low light and low sun angle photography (long shadow areas) and for wide latitude photographic exposure.
The spectral sensitivity is extended in the near infrared range of the energy spectrum, color sensitivity: panchromatic up to 750 nm. As a result, the film offers excellent penetration through haze, fog and other atmospheric conditions liable to affect the image quality. Due to the reduced scattering by the atmosphere, images are sharp and well edged. The near IR sensitivity and the strong response to red light allow for nocturne red flash photography as well as daylight photography. The graininess of the emulsion is low thanks to the 2-layer emulsion architecture. The low granularity makes the film very scanner-friendly and the scans deliver noise-free images in the image highlights.
The film should be handled in complete darkness.
*The 620 Film Spool Our 620 Film is hand-rolled onto a new FPP mold-injected plastic, re-usable 620 film spool. Our FPP 620 Spool is mold injected and is just a fraction thicker than vintage metal spools due to the fabrication requirements. Our spool will be snug in 1% of 620 cameras. It will loosen with repeated use (if you re-use your spool or can be easily sanded down with a piece of sandpaper.)