35mm Vision 3 Film - FPP EXP vision 320T (1 Roll)
Expired Kodak Vision - 320T 35mm Film - 24exp
Tungsten Balanced / Recommended 100 iso / DX Coded - 100 iso / Process: ECN-2*
Kodak Vision 320T will deliver muted colors and enhanced grain. Tungsten film is for shooting using indoor lights or "hot" studio lights. Use a #85 color correction filter over your lens for normal color when shooting in daylight. Shooting in daylight without a 85 filter will produce "blue hues".
*NOTICE: This motion picture film CAN NOT be processed by any standard commercial lab! Process yourself using our negative kit or use the recommended labs below.
Michael Raso tested 320T with his Canon FTb/50mm ssc f1.4 lens at 100iso. Home processed in the FPP Color Negative Kit / Epson v700 scan
Process at home using the FPP Home Color Kit
or send your film to
THE LITTLE FILM LAB
THE CAMERA SHOP
OLD SCHOOL PHOTO LAB
Why can't I process this film at my favorite C-41 lab? - Kodak's color motion picture films have an additional layer (on the shiny, not the emulsion side) called a "Rem Jet". Although technically this film can be processed C-41, this Rem Jet will foul commercial lab's equipment and there for can not be commercially processed. DO NOT BRING THIS FILM to a commercial lab or think you can "slip it through" - it will severely mess up their machines!!!
What commercial lab will process my negs, scan and or print for me? - See links above.
How do I process this film at home with FPP's Unicolor c-41 Kit?
In addition to the normal directions for C-41 home-processing please add the following step.
After your Blix, rinse your film in a half bucket of hot water (80 - 102 degrees F). With your thumb, gently rub the non-emulsion side of your film as you remove it from your film reel. Careful not to scratch the emulsion of your film. Final rinse under running water before submerging your film into the two-minute Stabilizer. You will see the black rem jet in your water as you rinse.
That's it! Hang your film to dry and then scan! Enjoy!!!!