Darkroom Supplies - FPP C-41 Development Kit (1 Quart - Liquid)
FPP C-41 Home Development Liquid Kit - 1 Quart
Develop Color Negatives (C-41) at home!
This kit only ships to US and Canada. Kits to Canada must ship USPS First Class
What will I need? You will need the basic darkroom tools - tank, beakers, etc. to develop your color film. If you're new to home developing check out our blog WHAT STUFF DO I NEED to see. well, what stuff you need. Once developed you will need a scanner to scan your newly developed negative. We recommend the Epson v700.
How to store and s-t-r-e-t-c-h MY KIT to get the maximum rolls per kit? Firstly, it is important that the recommended number of rolls per kit is no more than 12 - 15. If you are shooting something very important, please consider abiding by those guidelines. Before capping your chemistry after use, squeeze out all of the extra air making your chems air-tight. This will greatly prolong your kit. Our recycled 1-Liter containers are perfect for storing and squeezing out extra air. You will need THREE bottles for your C-41 Kit (One for the Developer, One for the Blix, One for the Stabilizer) Note that 1 Liter container is slightly more than 1 quart - use marbles or squeeze to remove extra air before capping.
Can I PUSH my color film?
What if I shot my Portra 400 at 800 iso...or 1600 iso? Can I push develop? Yes, you can.
BREAKING NEWS! If you are processing at home with our very own C-41 Kit you can SHOOT and PROCESS any C-41 film AND you can also develop the awesome Kodak Vision 3 line of color motion picture films! Read on!
How do I process Kodak Vision 3 line of films with FPP's c-41 Kit?
In addition to following the standard directions for C-41 home-processing please add the following steps.
1. When pouring your chemistry back into your containers, please use a coffee filter in your funnel to capture any "rem jet" waste. This will keep your chemistry clean for re-use!
2. After your Blix, rinse your film in a half bucket of hot water (80 - 102 degrees F). With your thumb, gently rub the non-emulsion side of your film as you remove it from your film reel. Careful not to scratch the emulsion of your film. Final rinse under running water before submerging your film into the two-minute Stabilizer. You will see the black rem jet in your water as you rinse.
That's it! Hang your film to dry and then scan! Enjoy!!!!
Notice: We can not replace kits if not mixed properly or if accidentally discarded. Do not get your blix (even a drop) into your developer! We only sell full kits. We do not have replacement parts. We do not accept returns on photo chemistry.