Double 8 Film - Cine8 BW Negative 100 ISO (25 ft)
FPP Cine8 8mm BW Negative 100 iso Film
25 ft roll (Shoot side 1, flip reel, shoot side 2) / 100 iso
Does not include developing / scanning.
Please read all of the information on this page (including terms) before ordering. Motion picture film is not returnable.
Our 100 speed negative film has plenty of latitude - meaning you can set your ISO (asa) to 40 for automatic cameras for beautiful results. Negative film is for scanning and not for projection. Please read all the information on this page before ordering.
Film purchase does not include develop / scan services. The FPP offers Developing and Scanning of this film (service sold separately)
FOR BEST SAVINGS Choose our Film-Develop-Scan BW BUNDLE HERE.
- Black and White Negative Film
- ISO 100 (Set your ISO to 40 in automatic 8mm cameras)
- 2x8 mm standard / 25 foot roll film
- Normally 8mm is shot at 16fps (frames per second)
- Frame size 4.8mm x 3.5mm
- Not for cameras that need 8mm magazine cartridge film. Not for Super 8 cartridge or 16mm cameras
About the film and ISO: FPP Cine 8 bw 100 Negative is a black-and-white negative film (triacetate base) with medium to low grain and high resolving power. FPP Cine 8 bw 100 Negative has a speed rating of ISO 100.
above: How to know if your camera can take Cine 8 film? Open your camera compartment. You will see one empty spool (the take-up Spool). Need a camera take-up spool? Grab one from The FPP!
How does this film work?
Regular 8 film is actually 16mm in width (on a 25 ft daylight camera spool). On the first pass though the camera, the film is exposed only along half of its width. When the first pass is complete, you open the camera and flip / swap the spools. The same film is exposed along its other edge. After the film is developed, the film is then ready for scanning.
How do I load my camera?
Each camera is slightly different but check out this video where Michael Raso loads a Revere 8 Model 88.
Video below: Test roll of Cine8 BW 100 Negative shot using the Zeiss-Ikon MoviKon 8 Camera
Terms – With the rare exception of a film product recall, user issues with film are a by-product of the deterioration of parts in the vintage cameras used to shoot the film. Even functioning and previously tested vintage cameras may experience motor film transport issues, film breakage, light leaks, over-and-under-exposure, and emulsion scratches. We feel it is important to bring your attention to these risks as we do not accept returns, offer replacement film or refunds on movie film.